One of the conclusions of my Bad Casting Day was that I needed better regulation of the pressure of the compressed air which controls the caster operation. The caster has about 30 pins about 3/8″ (1cm) in diameter which must…
Category: Kevin
Rebuilding composition mould 12-pt 3E3618R
After my Bad Casting Day, one thing on the to-do list was to tear down the mould because the type being cast had a lot of flash at some of the edges.
A slightly better casting day
After the really bad casting day a few weeks ago, almost anything would be an improvement. I had taken steps to resolve some of the problems, and here is the result:
A Bad Casting Day
Yesterday I made a try at casting a font of 12-point Caslon Old Style using composition mats and the computer interface for the caster.The results were less than stellar. A whole bunch of things went wrong:
Thoughts on Making Lanston Matrix Blanks
There are times where it would be nice to be able to make my own Lanston-style display matrices to use on my Monotype Composition caster. Often I find that matrices made by other casting aficionados were made by cannibalizing a…
Relabeling Those Pesky Caslon Matrices
I recently found a pair of mis-labeled matrices in my set of 18-point Caslon Old Style, and although I could just leave a note in the storage box, I thought it would be better to just correct the markings on…
Improved Shim for my 49A Display Matrix Holder
When I cast display type from Lanston display matrices I use an English mould because the one I have is in generally better condition than the American-made Lanston display moulds I have. This mould’s cavity is not in the same…
More on that ‘st’ (de câlisse) matrix
My previous casting of 18-point Caslon Old Style had enough defects that I ended up re-casting it. A couple of the problems are described herein. After calculating all the adjustments to cast the ‘st’ ligature from the non-factory-made matrix, I…
Exploding Mould Blade Operating Rods!
During my recent casting run of 18-point Caslon Old Style I found that there were enough problems with the font that I decided to just recast it entirely. I had solved all my alignment, set-width, and substandard matrix problems, so…
Casting #337 Caslon Old Style 18pt
This is the first time I have cast this particular font, and although it mostly went well, I had one sort that miscast. The problem first showed up on a carbon-paper proof of the type:The ‘st’ ligature seemed to be…
Top