As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems:
As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems:
As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems: The keyboard cams, which…
As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems: The transfer of the…
As previously mentioned, I’m trying to get the Linotype at the Mackenzie Printery & Newspaper Museum up and running again. I’ve had to fix several problems, and here are the details on one of the problems: During the Linotype’s casting…
After a year or two off due to COVID-19, the Howard Iron Works Print Expo & Fair is on again next month! There will be fewer vendors than previously to maintain physical distancing, but we will have a table there…
If you’ve been reading this blog much at all, you may have noticed a link in the sidebar “En Français S.V.P. !”. This invokes Google Translate on the current page, and from there as you follow links, you get translations…
Over the past several weeks I’ve been spending Saturday mornings at the Mackenzie Printery and Newspaper Museum in Queenston, Ontario, near Niagara Falls. This museum is located in the historic house where William Lyon Mackenzie lived for a while and…
We took a day trip to the Falls last Friday, and this time we visited the Niagara Parks Power Station which we missed on our last visit. This station was built in 1905, was in operation for 100 years, and…
After much thought about my problem with second shot, and with little help from any manuals, I’ve got my caster to behave properly. The second shot problem was caused by an incorrect adjustment in the pump crosshead and linkage area.…
After much delay, we will be holding another Introductory Papermaking Workshop, on Saturday, August 6th, 2022, from 9am to 4pm at our store in New Dundee. Our workshop last August was held mostly outdoors on our covered porch, but what…