Laboratory Handsheet Former for sale

We bought this handsheet former several years ago as part of a lot of commercial papermaking laboratory equipment and it is time we tried to sell it. This unit is for making standardized test sheets following TAPPI (The American Pulp and Paper Institute) procedure T205 “Forming handsheets for physical tests of pulp.”

TAPPI Sheetformer Bottom TAPPI Sheetformer Top

Unfortunately I don’t have a photo of it set up for use but a drawing can be seen as Figure 2 in the above reference. The near end of the pipe/valve seen on the right side of the second photo attaches to the drain of the cylindrical tank, which can be seen on the right side of the first photo, and the whole assembly stands upright with the base of the cylinder on a stand (not included) over a drain sump. The cylinder can be unlatched at its base and tipped open to reveal a removable round screen, on which the sheet is formed. The sheet formed is 158.8mm diameter. A trough around the base of the cylinder catches spilled water and sends it down the gray plastic drain pipe visible in the first photo.

To use it, the unit is filled with water to a certain level in the cylinder, also filling the long drain pipe. A specific amount of pulp is added to the cylinder and stirred a specific number of times using the included dasher (which is then removed). Pushing down on the lever opens a valve at the foot of the tall drain pipe, and the water spills from the bottom of the pipe; the height of the column of water generates a considerable suction, drawing the pulp against the screen to form a sheet. The idea is the emulate the suction applied to the mould screen (“wire”) in papermaking machines.

The cylinder is again unclamped and tipped open, the screen is removed and the sheet is couched off onto standardized absorbent blotters and placed in  a standardized press to press out the water, thence to a (what else?) standardized drying stack. The finished sheet is cut up into pieces destined for a suite of other standardized tests.

TAPPI Sheetformer accessories

Parts and Accessories

There are a few accessories included:

  • 6 mould screens, some dirty, some like new, both brass and stainless steel
  • Several pieces of both the coarse and fine screen to rebuild the mould screens
  • A stack of standard blotters
  • Couching and Pressing plates
  • The dasher for mixing the pulp in the cylinder
  • A cross-shaped baffle to inhibit vortex formation in the drain chamber

We are asking $1000 for the sheet former and accessories, HST and shipping extra.

Posted in Sold, Test Equipment
9 comments on “Laboratory Handsheet Former for sale
  1. kpmartin says:

    This post was updated to include a photo and specific list of accessories.

  2. Alfonso bello says:

    Please send me a email how to contact you to get detail about the sheet dormer?

  3. Vibhore Rastogi says:

    Dear Sir/Madem,

    We are interested to buy only the Fine standard sheet screen plate for the Manual hand sheet former paper pulp machine. If its possible please specify the price.

    Thanks
    Vibhore Rastogi
    PhD. student
    University of Freiburg
    Germany

  4. kpmartin says:

    Vibhore,
    I have one person already interested in purchasing the whole sheet former. I would have to check if he would be willing to part with one of the screens.

    Are you interested in the screen mounted on its ring, or in one of the squares of replacement screening use to rebuild one of these?
    -Kevin
    p.s. the e-mail address you put in your posting did not work for me.

  5. peter de Clerck says:

    is the handsheet former still available for sale?

  6. Yepi A Saifullah says:

    According to the price, does it include shipping/delivery cost?
    thank you.

  7. kpmartin says:

    The price includes packing but does not include shipping costs, as these depend heavily on the destination and mode of transport.

  8. kpmartin says:

    This equipment has now been sold.

Leave a Reply

Your email address will not be published. Required fields are marked *

*