I have four guillotine knives, but I’m not even sure what brand or model they are for, nor whether they have been sharpened so much they aren’t useful any more. They are actually two pairs of essentially identical knives.
The first pair of knives is 28.3125” long by ⅜” thick by about 3” wide, and according to one of the carriers is ground to 22°. They are both branded “FASSCO Made in Germany F220 Schwedenstahl.” The 6 pairs of holes appear to be for ⅜” bolts and are 4.1375” apart with the first hole about 4½” from the left end and the last hole 3” from the right end.
The second pair of knives is 35” long by 7/16” thick by about 3¾” wide. There is no branding on these. The 7 pairs of holes appear to be for ½” bolts and are 5.521” apart with the first hole about ¾” from the left end and the last hole 1¼” from the right end. One of them has quite a bit of surface rust on its face but the back and bevel are fine.
All four of them probably need sharpening.
I’m asking $50 per pair for these, plus shipping. If you are interested, or even if you can identify what model of guillotine they are for, please e-mail me.