Category: Composition Casting

Another Wayzgoose is History

Last Saturday the 36th annual Wayzgoose was held at the Grimsby Public Library and Art Gallery in Grimsby, Ontario. We were fortunate to have our sale table right next to the front door so we didn’t miss any visitors. Lily

Posted in Composition Casting, Grimsby Wayzgoose, Printing, Type Setting, Us

Proof from the March 2nd Casting

My post on this weekend’s casting adventures did not include a proof of the imperfect but useable forme cast in the early evening, so here it is: This was done with rubber based ink, and the gloss of the ink

Posted in Composition Casting, Kevin, Monotype Composition Caster

March 2nd Casting Session: A Modicum of Success

The first job was to address the problem of the magnetic starter tripping out every few lines. I found online several documents regarding the pulsing nature of the current drawn on the input of a VFD. I think the pulsing

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

March 1st Casting Session

This morning I checked the angular alignment of the nozzle on my caster and found that it was off a tiny bit, so I adjusted that. I also reset the nozzle to its proper center position on the assumption that

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

February 23rd Casting Session

Last Sunday was another frustrating day of casting. The only way I could get the nozzle to seal even remotely well was to have it clearly out of alignment, so it was moving sideways every time it rose and dropped.

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

February 15th Casting Session

In preparation for casting last Saturday, I moved a few mats in the matcase I was using so there would be low quads where the ribbon expected them. The ribbon also expected a 10-unit space to exist, so I placed

Posted in Composition Casting, Kevin, Monotype Composition Caster

Misdiagnosis Results in Broken Part

Last Saturday I tried again to do a run of composition casting. At some point, the galley mechanism stopped working, and a very long line developed in the galley. I stopped casting and looked for the cause of the problem.

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

Result from Last Weekend’s Casting Run

Despite all the difficulties I encountered in last weekend’s attempt to do some composition casting, I still ended up with some type cast, which I proofed on my Challenge MA15 and annotated: From this it looks like my matcase arrangement

Posted in Composition Casting, Kevin, Monotype Composition Caster

A Manual Punch for Monotype Ribbons

In the process of patching together the only ribbon I have for my Monotype, some of the holes have been blocked and needed to be re-punched. Furthermore, repairing the edges of the ribbon requires re-punching all the tractor holes. Finally,

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

Composition Casting Followup: Type Carrier Repair

While trying to do some composition casting last weekend I found that an internal part of my type carrier was broken, so I had to give this part a quick servicing. There aren’t actually that many internal parts to deal

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /htdocs/papertrail/blog/wp-includes/functions.php on line 3597

Notice: ob_end_flush(): failed to send buffer of zlib output compression (1) in /htdocs/papertrail/blog/wp-includes/functions.php on line 3597