Month: March 2014

Rubber feet for the Challenge Proof Press

Proof presses are subjected to a lot of sideways forces when used, caused by the carriage hitting its stops at either end of its stroke. These can be reduced by slowing down near the end of the stroke, but there

Posted in Challenge MA15 Proof Press, Equipment Acquisition, Repair, and Maintenance, Kevin

Putting a back on the Challenge Proof Press

When I got this press earlier this year, I printed off a nice copy of the instructions. Challenge Machinery still exists, and their web site is quite useful in that they seem to be trying their best to have manuals

Posted in Challenge MA15 Proof Press, Equipment Acquisition, Repair, and Maintenance, Kevin

Last week’s time suck

Last week was March Break, and Audrey and Lily flew to Calgary to visit Granny. I took the opportunity to do a few home improvement projects (replacing a bathroom sink, putting up a knife holder in the kitchen, and installing

Posted in C&P Old Style 7×11, Grimsby Wayzgoose, Kevin, Printing, Type Casting, Type Setting

Repairing the other Monotype nozzle

While trying to do some composition casting recently, I concluded that the nozzle on my caster was worn or damaged, causing it to leak profusely, and the spare nozzle I had on hand was in even worse condition. I repaired

Posted in Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

A Bit of Font Casting

I have a short project in the works, and since I don’t have a Monotype Keyboard or a computer interface for the caster, I have to fall back to hand setting some text. I have a few paragraphs that I

Posted in Font Casting, Kevin, Monotype Composition Caster, Other people Tagged with:

Proof from the March 2nd Casting

My post on this weekend’s casting adventures did not include a proof of the imperfect but useable forme cast in the early evening, so here it is: This was done with rubber based ink, and the gloss of the ink

Posted in Composition Casting, Kevin, Monotype Composition Caster

Hilarious auto-captioning of one of my YouTube videos

I recently posted a video on YouTube showing the basic operation of the TAPPI hand sheet former we have for sale. Just this evening I noticed that YouTube tries to do speech recognition to generate closed captioning for the videos.

Posted in Humour, Kevin, Pulp preparation, Sold

March 2nd Casting Session: A Modicum of Success

The first job was to address the problem of the magnetic starter tripping out every few lines. I found online several documents regarding the pulsing nature of the current drawn on the input of a VFD. I think the pulsing

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster

March 1st Casting Session

This morning I checked the angular alignment of the nozzle on my caster and found that it was off a tiny bit, so I adjusted that. I also reset the nozzle to its proper center position on the assumption that

Posted in Composition Casting, Equipment Acquisition, Repair, and Maintenance, Kevin, Monotype Composition Caster